All carburetors are fully machined and blueprinted right to the maximum legal limits and then tested on the industry leading Superflow SF-60 computerized flow bench to ensure you get the highest quality parts.

OHV Carbs & Parts WKA Animal: Stock, Controlled, and Limited!
Blueprinted WKA Stock Animal Carb - setup for methanol, fully blueprinted, flowed, and ready to bolt on and race.	$175.00
Animal Carb Alcohol Conversion Kit - This is NOT the alky kit that Briggs & Stratton sells. This kit contains the following: custom sized fuel nozzle, custom sized emulsion tube, custom sized main jet, custom sized pilot jet, and main needle. This kit has the fuel nozzle reamed to size, emulsion tube worked/sized, main jet reamed to size, and pilot jet reamed to size. This is a package deal that we have found to work in ANY Walbro carb for unrestricted classes so far. It also comes with an instruction sheet on setting the correct float height, idle adjustment, and air bleed adjustment. With this kit, there is no other adjustments needed. You install it the way the instructions state, bolt on the carb, and fire it up. The advantage with this kit over the Briggs kit is, we have already worked out the tuning aspect of it and there is no guessing on your part.	$50.00

Currently there are not a lot of shops that know how to properly set up the Animal Walbro float carburetor correctly to be able to drop on your motor and be race ready when you get it. We have spent a LOT of time getting that done and learning to do it right. It's not as easy as just buying a methanol kit, dropping in the middle of the road jets and hope it turns out right. In fact, the jets we use are not even included in the kit. Blueprinting the Walbro is a learned art because there is a LOT to and knowing where to work and where to leave it alone is key to a killer carb.